installing 70cc big bore kit tomos targe, puch models. Also installing larger front sprocket 27t Scooter Therapy

Installing a 70cc Kit on a Tomos

Tomos	Information
	Remove the side panels and front engine cover. The exhaust pipe is removed, spark plug wire removed from plug. Remove cylinder head nuts, and cylinder head. To remove the cylinder, you must first take off the fuel valve. The fuel in the tank will leak out when you remove the valve.
	Remove the carburator and take the top off to unhook the throttle cable from the throttle plate. Remove the air filter housing.
	Slide the carb off the intake maifold Remove fuel valve and slide cylinder head off the studs. You may need to jar it loose with a soft blow from a soft hammer. Don't forget to unhook the oil line on the intake manifold.

	Don't spill your gas on the grass, or mom will have your you know what
	Remove the circlips from the piston and carefully slide the wrist pin out. Try not to lose the bearing. You are not working on a gravel driveway, or dirt floor, are you?
	Install the studs in the cylinder and bottom them out. A little oil is nice here.
NOTE: Adding any of these parts will void your warranty
Next >>

Scooter Therapy Inc
12 North Few Street | Madison, WI 53703
toll free 1-800-411-1543 | local 1-608-255-1520
fax 1-608-255-1587 | E-mail

Scooter Therapy Inc
12 N. Few St
Madison, WI 53703

toll free 1-800-411-1543
local 1-608-255-1520
fax 1-608-255-1587
E-mail

Hours: M-F, 9-6 Saturday, 10-3 CST

copyright (c) 2000
Scooter Therapy inc.