This is a IMPACT SCREWDRIVER with 4 bits to remove many types of stuck, tight, or rusted
              fasteners on all types of machinery. This tool is required for removing the side engine covers on Japanese
              bikes with Phillips head screws. 

---

      Put the tool in the screw and hit the top firmly with a Ball Peen Hammer. The Blow forces the tip firmly into the head of the screw so it cannot slip, while the screwdriver automatically turns the bit to loosen (or tighten) the screw.  Only 19$ complete. 

---

4 extra bits 5$ 

---

         E mail to ORDER                    Home

---